Wireless connectivity and beyond

And internet connectivity is just one of the overall networking requirements for a typical modular building. Systems such as CCTV, building alarms and other security systems, as well as door entry systems and building management systems (BMSs) like fire safety solutions all require networks of some shape or form. All this means that modular construction projects need to pay serious attention to wireless network planning which determines when and how the network infrastructure is built in. Wait until all of the individual pods or components have been installed onsite, and add wireless connectivity at the very end? You get the advantage of clarity and a holistic approach – but are also adding a potentially complex build and installation task at the end of what was meant to be a clean, logical and accelerated construction project, piece by piece.

A converged approach from Curve IT

Instead, wireless connectivity should be approached in a modular way too. One approach is to install a single, strong converged network throughout the entire building, and then use software to split it up into individual virtual LANs, or VLANs. Each individual VLAN can then be used to support a different networked function,  from security and management systems to whole-building WiFi.

Turning specifically to WiFi, an approach which is particularly useful for build to rent and student accommodation is to generate Personal Area Networks, which allow residents to access their home WiFi from anywhere in the building – even if they are in the lobby and their flat is on the top floor. These networks can also travel with tenants between individual buildings in an operator’s estate.

Ultimately, modular constructors should look to involve IT networking specialists as early as possible in their projects, working with both the operations and the brand or marketing team to develop a wireless connectivity strategy which is as efficient and logical as the building itself.

The post Wireless network planning in modular buildings appeared first on Curve IT.

The shared network, which was developed by Brighton based connectivity specialist Curve IT, has been deployed across four new developments in Islington, Bethnal Green, Greenwich and Maidenhead and is set to include a fifth Essential Living site in Swiss Cottage, which is currently under construction.

The project will enable Essential Living to deliver multiple services to both tenants renting its properties and to back-office staff managing those properties, via a single network installation.

The converged network solution will be used to provide reliable, superfast broadband access to residents while also supporting operational requirements including CCTV, door entry, access and alarm systems, and a shared building management system.

Work is also already underway to deliver electricity, water and heating metering across the network.

Curve IT delivered the network via a point-to-point connection, installing antennas and receivers on the buildings to achieve robust and reliable line of sight connections from property to property. By working with Essential Living early in the build-to-rent project stage, Curve IT was also able to save the firm from going out to separate mechanical and electrical (M&E) and cabling contractors for each of the properties.

From high-performance WiFi into individual flats, to alarm and CCTV systems, all are run from a single fibre and copper network, divided up into virtual subnetworks, or VLANs. This eliminates unnecessary duplication within and between the properties, and provides an efficient foundation for an array of smart building systems.

Essential Living focuses on delivering premium apartments in sought-after locations, with 24-hour on-site teams and exercise rooms. Delivering high-quality connectivity to residents, and ensuring seamless and effective back-office systems is essential to maintain this premium brand. Additionally, deploying a converged solution across all five sites can enable the seamless development of further services, such as Personal Area Networks which travel with tenants throughout buildings, as well as building-specific apps, in the future.

Ian Merrick at Essential Living said: “We pride ourselves on offering an excellent standard of living to our tenants, and really understanding their desire to be connected, both in terms of location and technology.

“Curve IT understood that from the outset, and proposed a cost-effective and highly scalable solution. It makes absolute sense for us to run all our connected functions, for tenants and staff alike, off the same converged network, and Curve IT has made that happen.”

Simon O’Hare at Curve IT added: “Build-to-rent firms have so much to gain from converged networks. They save a huge amount of money and complexity right from the beginning, by avoiding the need to deal with multiple contractors or unnecessary duplication. Then, they provide an outstanding platform for deplopying a wide array of smart building functions and  innovative tenant experiences – at precisely the rate that suits the operator.”

The post Essential Living launches converged network solution across London build to rent sites appeared first on Curve IT.

What services and applications could sit on a build to rent converged network?

• HSIA – (high speed internet access) for residents
• IPTV – television services
• VoIP – Voice over IP telephony services for residents and staff
• Access control and door locking systems
• CCTV
• Building Management Systems
• Property Management Systems
• Point of Sale
• Digital Signage

What are the advantages of a build to rent converged networks?

Better performance; Reduced cost; More flexibility; Minimising environmental impact

• Lower cost of installation: installing one core infrastructure can reduce the amount of cabling required, and ensure that switches are used in the most efficient way. We have seen cost reductions of around 30% moving from a traditional network architecture to converged.
• Better network management: a high-performing network is critical for the smooth operation of all the services within your building and having a converged network allows you to choose a single operator to oversee these services, and so offer a better level of service to your residents and team. In the past you may have multiple different networks all managed by different vendors, meaning different SLA’s, help desks, operating hours etc. A converged network has one management platform which can allow better monitoring and allow issues to be identified and dealt with much more quickly.
• Flexibility and future proofing: Having an enterprise grade active network means adding new or extra services and applications can be completed much more easily and potentially without having to add new cabling or hardware. It’s impossible to say any technology is ‘future-proof’ however the 10Gb standard is currently recommended and fully suited for most needs.
• Better design and hardware: with all services running through one core infrastructure it often proves more cost-effective to increase the sophistication, capacity and performance of this core to levels that would not be commercially sensible if running multiple networks. We typically see a move from multiple 1Gb in a traditional environment to 10Gb in a converged, offering potentially a huge uplift in performance. This will normally include resiliency and redundancy to a much higher level.
• Minimising environmental impact: a single connection manages and operates all the systems, meaning reduced power usage and carbon footprint. Less hardware takes up less space and ensures the right amount of switch ports are available, in the right locations. Monitoring network ports, cables, connectors and components in real time with an intelligent infrastructure management system allows the network to be managed far more efficiently and optimises energy consumption.

 Are there other considerations?

Many, and this is where the design and management skills of Curve IT are paramount. These are just a few of the many considerations you will need to take into account.

• Resiliency – how to deal with power failures. We can advise on UPS or generator back-up power.
• Network resiliency – spanning tree? What support packs on hardware?
• Redundancy – internet services into and out of the building and the routes these could take. Do you need geo-diverse routings? How many 9’s in your SLA?
• Bandwidth management (WAN) – what do you need and when do you need it? What is the best model? Who is the best provider and do they have the interconnects you need?
• Bandwidth management (LAN) – what applications do your residents / team need? Should some be limited? Do you want a revenue stream?
• QoS – how, where and when?
• VLANs – who and how to manage?
• PAN – do your residents need a Personal Area Network?

The post Why should Build to Rent operators consider Converged Networks? appeared first on Curve IT.